8
WARNING
:
The use of any accessory not recommended
for use with this tool could be hazardous.
The RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel
-cadmium or lithium-ion battery (or battery pack) indicates that the costs to
recycle the battery (or battery pack) at the end of its useful life have already
been paid by BLACK+DECKER. In some areas, it is illegal to place spent
nickel-cadmium or lithium-ion batteries in the trash or municipal solid waste
stream and the RBRC program provides an environmentally conscious
alternative. RBRC in cooperation with BLACK+DECKER and other battery
users, has established programs in the United States and Canada to facilitate the
collection of spent nickel-cadmium or lithium-ion batteries. Help protect our environment
and conserve natural resources by returning the spent batteries to an authorized
BLACK+DECKER service center or to your local retailer for recycling. You may also
contact your local recycling center for information on where to drop off the spent battery,
or call 1-800-8-BATTERY. NOTE: Batteries are integrated into the tool and should not be
removed. To recycle, return the tool to an authorized BLACK+DECKER service center.
Service Information
BOND MFG’s Customer Service Staff are trained personnel to provide customers with
efficient and reliable power tool service. Whether you need technical advice, repair, or
genuine factory replacement parts, call: 1-888-841-7304 or email customer.service@
BONDMFG.COM. This Class B digital apparatus complies with Canadian ICES-003. This
device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This Class B
digital apparatus complies with Canadian ICES-003.
Summary of Contents for BD1168PDQ
Page 10: ...10...
