724-746-5500 | blackbox.com
Page 29
Chapter 3: System and Network Setup
This setting only works when you’re using Telstra big pond’s network service in Australia.
Table 3-7. Telstra big pond options.
Item
Description
User Name (1):
Type in the user name assigned by Telstra.
Password (2):
Type in the password assigned by Telstra.
User device login
Check this box to choose the login server by yourself.
server manually (3):
Login Server (4):
Type in the login server’s IP address here.
When you finish with all settings, click on the “OK” (5) button; if you want to go back to the previous menu, click on the “Back”
button.
When all settings are finished, you’ll see the following message displayed:
Figure 3-28. Settings saved successfully screen.
Click on the “Apply” button to prepare to restart the router, and you’ll see this message:
Figure 3-29. System restart screen.
Wait for about 30 seconds, then click on the “OK” button. You’ll be back to the router management interface again, and the
router is ready with new settings.
Summary of Contents for WRT-300BGN-R2
Page 93: ...Page 93 NOTES...
Page 94: ...724 746 5500 blackbox com Page 94 NOTES...
Page 95: ...Page 95 NOTES...
