724-746-5500 | blackbox.com
Page 12
Chapter 3: System and Network Setup
3. System and Network Setup
3.1 Build the Network Connection
Follow these instructions to build the network connection between your new wireless router and your computers and network
devices:
1. Using Ethernet cable, connect your xDSL/cable modem to the router’s WAN port. See Figure 3-1.
Figure 3-1. xDSL cable/modem connection.
2. Connect all your computers, network devices (network-enabled consumer devices other than computers, such as game con-
soles, or switches/hubs) to the router’s LAN ports. See Figure 3-2.
Figure 3-2. Connect devices to LAN ports.
3. Connect the A/C power adapter to the wall socket, and then connect it to the router’s power socket. See Figure 3-3.
Figure 3-3. Connect the power.
4. Check all front-panel LEDs. The PWR LED should be steadily on, and the WAN and LAN LEDs should be on if the computer/
network device connected to the respective port of the router is powered on and correctly connected. If the PWR LED is not
on or any LED you expected to be on is not, recheck the cabling or go to Appendix A, Troubleshooting.
Summary of Contents for WRT-300BGN-R2
Page 93: ...Page 93 NOTES...
Page 94: ...724 746 5500 blackbox com Page 94 NOTES...
Page 95: ...Page 95 NOTES...
