28
NETWORK POWER SWITCH
5.3.1 A
PPLYING
C
OMMANDS TO
S
EVERAL
P
LUGS
Boot/On/Off commands can be applied to one plug, several plugs, a range of
plugs, or all plugs as described below:
NOTE
When commands are applied to several plugs, the Network Power
Switch will delay for approximately 1 second between plug operations.
For example, when switching all plugs On, the Network Power Switch
will switch Plug 1 On, delay one second, switch Plug 2 On, delay one
second, etc.
1.
Single Plug:
To apply a command to a single plug, enter the number or name
for that plug. For example:
/ON 3
or
/ON ROUTER
2.
Several Plugs:
To apply a command to several plugs, enter plug names or
numbers with each name/number separated by a plus sign or a space. For
example:
/OFF 1+3+7
or
/OF ROUTER DSU/CSU
3.
Range of Plugs:
To apply a command to several plugs in sequence, enter the
plug names or numbers with each name/number separated by a colon (:). For
example:
/BOOT 1:4
or
/BOOT ROUTER:DSU/CSU
4.
All Plugs:
To apply a command to all owned plugs, enter an asterisk in place
of the name or number. For example:
/ON *
or
/BO *
5.
Plugs with the Same Name:
If you have assigned an identical plug name to
several plugs, all such plugs can be addressed with one command. For
example, if plugs 3, 4, and 5 have been named “ATMSWITCH”, then all three
plugs can be switched with the same command as shown below:
/ON ATMSWITCH
or
/BOOT ATMSWITCH
Summary of Contents for SWI069A
Page 3: ......
