22
NETWORK POWER SWITCH
Figure 5. Network Parameters Menu (System Mode Only).
4.6 Network Parameters
In order to communicate with the Network Power Switch via network, the IP
Address, Subnet Mask, and Gateway Address must first be defined via the Network
Parameters menu. The Network Parameters menu also allows you to implement IP
Security features, which can restrict command-mode access based on the user’s IP
Address.
Settings for network parameters will depend upon the configuration of your
individual network. Contact your network administrator for appropriate settings,
and then assign parameters as described in this section.
To access the Network Parameters menu, type
/N
and press
[Enter]
. The screen
shown in Figure 5 will be displayed. Note that the Network Parameters menu is not
available in User Mode. The Network Parameters menu offers the following
options:
1.
IP Address:
Defines the IP Address for the Network Power Switch (Default =
undefined). Type
1
, press
[Enter]
, and follow the instructions in the submenu.
2.
Subnet Mask:
Defines the Subnet Mask for the Network Power Switch (Default
= undefined). Type
2
, press
[Enter]
, and follow the instructions in the
submenu.
3.
Gateway Address:
Defines the Gateway Address for the Network Power Switch
(Default = undefined). Type
3
, press
[Enter]
, and follow the instructions in the
submenu.
4.
IP Security:
Sets up the IP Security feature as described in
Section 4.6.1
.
5.
Mac Address:
Display’s the unit’s MAC Address. Note that this item is not used
to redefine the MAC Address.
NETWORK PARAMETERS:
1. IP Address:
(undefined)
2. Subnet Mask:
(undefined)
3. Gateway Address:
(undefined)
4. IP Security
MAC Address:
00-40-05-5e-f3-90
Enter Selection or <ESC> to Exit…
Summary of Contents for SWI069A
Page 3: ......
