24
16- OR 32-PORT 10/100 PHYSICAL LAYER ETHERNET SWITCH
If you can’t quite remember an IP address, go to the
Configure APCON Network
Device
menu (see Figure 5-2) and press the
Search
button. The screen shown in
Figure 5-4 appears. Enter a starting and ending IP address. This will give you a
range of IP addresses to search through. The IP address and MAC address for each
device found will be listed, as shown below.
Figure 5-4. Searching for a network device’s IP address.
Summary of Contents for SW595A
Page 3: ......
