17
CHAPTER 4: Operation
4.2.3 LCD D
ISPLAY
(32-P
ORT
S
WITCH
O
NLY
)
The LCD display indicates the available switch selection parameters. Scroll through
the main menu (only two lines are visible at any time) as shown in Figure 4-3.
Figure 4-3. LCD display main menu.
NOTE
Throughout this manual (and in the control software you received), the
vendor code ACI-2050 refers to the SW595A or SW596A. The vendor
code ACI-2050-C16 refers to the SW595A. The vendor code ACI-2050-
C32 refers to the SW596A.
4.3 LCD Display Control Menus (32-Port Switch Only)
The 32-port switch features an LCD display on its front panel. Following is a list of
the available commands. Use these commands to control your switch via the LCD.
SET PORTS:
PRESS ENTER TO CONNECT PORT 01 TO 32
(THIS WILL DISCONNECT PORT 01 FROM 02)
SET PORTS
----> DISPLAY PORTS
RECALL PRESET
STORE PRESET
DISPLAY POWER, TEMPERATURE
FRONT PANEL LOCK
SET SERIAL PORTS
SET DEVICE NUMBER
SET TEMPERATURE LIMIT
SET DISPLAY CONTRAST
DISPLAY VERSION
Summary of Contents for SW595A
Page 3: ......
