6
USER GUIDE
INSTALLATION
Single-Head Units:
1.
Ensure that power is turned off or disconnected from the unit and the computers.
2.
Use a DVI cable to connect the DVI output port from each computer to the corresponding DVII IN ports of the unit.
3.
Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit.
4.
Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the computers to the
AUDIO IN ports of the unit.
5. Connect a monitor to the DVI-D OUT console port of the unit using a DVI cable.
6.
Connect a USB keyboard and mouse in the two USB console ports.
7.
Optionally connect stereo speakers to the AUDIO OUT port of the unit.
8.
Optionally connect CAC (COMMON ACCESS CARD, SMART CARD READER) to the CAC port in the user console
interface. For models with CAC.
9.
Finally, power on the Secure KVM Switch by connecting a 12VDC power supply to the power connector, and then
turn on all the computers.
Note:
The computer connected to port 1 will always be selected by default after power up.
Note:
You can connect up to 4 computers to the 4 port KVM.
AUDIO IN
CAC IN
DVI-D IN
USB IN
Input Connectivity
Output Connectivity
AUDIO OUT
CAC OUT
DVI-D OUT
USB OUT
SS4P-SH-DVI-UCAC-P
1
2
3
4
1
2
3
4
QuadT
QuadQ
Preview
Select
PIP
Full
4 PORT DVI-D W/ AUDIO, CAC AND PREVIEW
SECURE KVM SWITCH
SS4P-SH-DVI-UCAC-P
Figure 6-1:
SS4P-SH-DVI-UCAC-P
IMPORTANT WARNINGS - FOR SECURITY REASONS:
•
This product does not support wireless devices. Do not attempt to use a wireless keyboard or a wireless mouse with
this product.
•
This product does not support keyboards with integrated USB hubs or USB ports. Only use standard (HID) USB
keyboards with this device.
•
This product does not support microphone audio input or line input. Do not connect any microphones or headsets
with microph s to this device.
•
Connection of authentication devices (CAC) with external power sources is prohibited.
