USER GUIDE
9
AUDITING: Dumping the Event Log via User Menu Options
RESET: Restore Factory Defaults
The following steps are intended for the system administrator.
Note:
Only one computer connected to port 1 is required for this operation
The Event Log is a detailed report of critical activities stored in the Secure KVM Switch or Secure KVM Switch memory.
A comprehensive feature list and guidance for Administration and Security Management Tools can be found in the
Administrator’s Guide available for download from: https://www.blackbox.com/NIAP3/documentation
To view or dump the Event Log:
1. Open the Administration and
Security Management Program
2.
Using the keyboard, press the Alt key twice and type “cnfg”.
3.
Enter the default admin name “admin” and press Enter.
4.
Enter the default password “12345” and press Enter.
5. Request a Log Dump by selecting option 5 in the menu.
(Shown in Figure 9-1)
* See Administration and Security Management Tool Guidance
for detailed information.
* See Administration and Security Management Tool Guidance
for detailed information.
The following steps are intended for the system administrator.
Note:
Only one computer connected to port 1 is required for this operation
Restore Factory Defaults will reset all settings on the Secure KVM Switch to their original state ….
Secure KVM Switch mode
CAC port registration will be removed
Secure KVM Switch settings will be reset to factory defaults
To Restore Factory Defaults via User Menu Options:
1.
Open the Administration and Security Management Program
2.
Using the keyboard, press the Alt key twice and type “cnfg”.
3.
Enter the default admin name “admin” and press Enter.
4.
Enter the default password “12345” and press Enter.
5. Select option 7 from the menu on your screen and press enter.
(Menu shown in Figure 9-1)
* See Administration and Security Management Tool Guidance for detailed information.
Figure 9-1
