25
CHAPTER 4: Configuration
4. Configuration
To configure your ServSwitch Wizard system, you’ll need to configure first the
attached PCs, as directed in
Section 4.1
, then the Wizard itself, as directed in the
rest of this chapter.
IMPORTANT NOTE
Throughout the rest of this manual, the [Enter] designation refers to the
main “enter” or “carriage-return” key (often labeled “
↵
”) on the main
section of the keyboard. Do not use the “Enter” key on the numeric
keypad or the extra “Enter” key found on the main section of some
specialized keyboards.
4.1 Configuring Your PCs
Configure your PCs in the same way that you would if your keyboard, mouse, and
monitor were all connected directly to your PCs. Keep in mind that the ServSwitch
Wizard emulates Microsoft compatible serial, IntelliMouse, and PS/2 mice; so
you’ll need to make sure that your PC software is configured for a Microsoft mouse
of the correct type. Refer to the list of supported drivers in
Section 3.1
.
Summary of Contents for ServSwitch Wizard SW651A
Page 1: ......
