13
CHAPTER 2: Introduction
2.3 The ServSwitch Wizard Illustrated
Figure 2-1. The ServSwitch Wizard’s front panel.
Fig. 2-2. The ServSwitch Wizard’s rear panel (SW652A shown).
Figure 2-3. The Remote-Control Module (KV6REM), an optional accessory.
The bottom panel of the ServSwitch Wizard isn’t shown here, but there’s an
8-position DIP switch mounted on it. You’ll use this switch if you ever do a “warm
reset” of the Wizard (see
Section 5.12
) or upgrade the Wizard’s firmware (see
Section 5.13
).
SW652A
Display shows
status and
mouse/keyboard
data activity
Display shows status and
mouse/keyboard data activity
Button for
changing
channels and
entering
configuration
mode
Button for
changing
channels and
entering
configuration
mode
Control-port
monitor connector
CPU-port video
connectors (blue)
Control
port
Connector
for
optional
power
supply
Control-port
mouse connector
Control-port keyboard
connector
Expansion port for
Remote-Control Module,
RS-232 control, multi-
video synchronization,
and firmware upgrades
CPU ports 1 through 4 (ports 3 and 4
are present on 4-port model only)
CPU-port mouse
connectors (green)
CPU-port keyboard
connectors (purple)
Summary of Contents for ServSwitch Wizard SW651A
Page 1: ......
