Black Box ServSwitch SW721AE-R2, User Manual

Page: 14 / 48

12
“R2” SERVSWITCH
NEXT: Next Port Button: Press this button to manually switch the shared
monitor, keyboard, and mouse from the currently selected computer to
the next one in sequence.
SCAN: Scan-Mode Button: When the ServSwitch is ON and operating normally
(not scanning), press the button once to put the button in the “in”
position. This causes the unit to begin automatic sequential scanning of
connected ports. (If the scan does not begin immediately, quickly press the
button twice more, so that it moves to the “out” position and back to the
“in” position again.) Pressing the button again (returning it to the “out”
position”) ends the scan. For normal operation, the SCAN button should
be “out.” If the system doesn’t function normally after you return the
SCAN button to the “out” position, perform a factory reset (see
Section
5.1 ).
2.4 The Rear Panel
All cable connections are made at the ServSwitch’s rear panel, as illustrated in
Figure 2-2 and described on the next page.
Figure 2-2. The rear panel of a KVM 4 to 1 ServSwitch (SW722).