Black Box ServSwitch Duo KV6EXT-R2 User Manual Download Page 3

Page: 3 / 53

SERVSWITCH

™

DUO EXTENDER

TRADEMARKS USED IN THIS MANUAL

BLACK BOX and the

logo are registered trademarks, and ServSwitch and

ServSwitch Wizard are trademarks, of Black Box Corporation.

Apple and Macintosh are registered trademarks of Apple Computer, Inc.

Hewlett-Packard is a registered trademark of Hewlett-Packard.

IBM, PC/AT, PS/2, RS/6000, and ThinkPad are registered trademarks, and

PC/XT is a trademark, of IBM Corporation.

Microsoft and Windows are registered trademarks, and IntelliMouse is a

trademark, of Microsoft Corporation.

Sun and Sun Microsystems are registered trademarks of Sun Microsystems, Inc. in

the United States and other countries.

Any other trademarks mentioned in this manual are acknowledged to be the property of the

trademark owners.

Summary of Contents for ServSwitch Duo KV6EXT-R2






















































Search results

Summary of Contents for ServSwitch Duo KV6EXT-R2

Reviews:

Brands by name

Popular brands

Black Box ServSwitch Duo KV6EXT-R2, User Manual

Search results

Summary of Contents for ServSwitch Duo KV6EXT-R2

Reviews:

Brands by name

Popular brands