28
SERVSWITCH
™
DUO EXTENDER
Don’t worry if you type the password incorrectly; you can always re-enter it, even
if you’ve exited and re-entered configuration mode. If you discover that you
messed up entering the password or that you can’t remember what the password is
only after someone locks the Extender, you can erase it by selecting “Clear UTP
Extender Password” in the Duo’s FUNCTIONS menu, as described in
Section 6.2
.
(You can erase the password
and
set all of the Extender’s keyboard-controlled
configuration options back to their factory defaults by issuing the [F] [8] [Enter]
command while the Extender’s in configuration mode, as described in
Section 6.3
.)
If you want to remove the password after setting one, get into configuration
mode, type the letter “P”, and press the [Enter] key as before, but then press
[Enter] again without typing in any other characters. (If you try to lock the Switch
before you’ve set a password, or after you’ve removed the password, the Switch will
still blank the video, but it won’t prevent someone from selecting another CPU.)
Summary of Contents for ServSwitch Duo KV6EXT-R2
Page 1: ...NOVEMBER 2001 KV6EXT R2 KV6EXTB R2 ...
Page 51: ...NOTES ...
Page 52: ...NOTES ...
Page 53: ...NOTES ...
