manualshive.com logo in svg

Black Box ServSwitch Duo KV6EXT-R2, User Manual, Page: 27 / 53

Share
Download
Black Box ServSwitch Duo KV6EXT-R2 User Manual Download Page 27

26

SERVSWITCH

™

DUO EXTENDER

4.2.2.B Issuing Other Configuration-Mode Keyboard Commands

While the Extender is in configuration mode, it is also possible to enter a number
of other keyboard commands that you can use to configure advanced options on
the Extender. (There are also commands for such functions as displaying the
Extender’s firmware revision, restoring a disconnected mouse port, and resetting
all of the keyboard-controlled configuration options to their factory-default states.)

Most of these commands consist of pressing a letter key, then a number, then

[Enter]. For example, to turn on mouse switching, type in [M], then [2], then
[Enter]. When you do this, the flashing Num Lock, Caps Lock, and Scroll Lock
LEDs on your keyboard—which normally flash in sequence during configuration
mode—will be affected this way:

1. After you press the first key of a command sequence, the Num Lock, Caps

Lock, and Scroll Lock LEDs will all be steadily lit. Any invalid character will be
ignored.

2. After you press the second key of the sequence, the Num Lock and Caps Lock

LEDs will remain lit and the Scroll Lock LED will go dark. Any invalid
character will be ignored.

3. After you press [Enter] to end the sequence, the command will be executed

(or rejected as incomplete if the second character was never entered) and the
LEDs will go back to flashing in sequence.

Here are the keyboard commands you can give the Extender in configuration
mode. (Letter keys are shown in uppercase, but the commands are not case
sensitive.) The settings are explained in greater detail in the indicated sections of
this manual.

•

Enable/disable mouse switching

(see 

Section 5.8

):

[M] [1] [Enter]

= Switching between CPUs with a 3-button mouse or

IntelliMouse is

not

supported (default)

[M] [2] [Enter]

= You can switch between CPUs with a 3-button mouse or

IntelliMouse

•

Restore mouse

(see 

Section 5.9

):

[M] [6] [Enter]

= Restore regular mouse

[M] [7] [Enter]

= Restore IntelliMouse

•

Set/clear password

(see 

Section 4.3

):

[P] [Enter] 

(password)

[Enter]

= Sets the Extender’s password

[P] [Enter] [Enter]

= Clears the Extender’s password

Summary of Contents for ServSwitch Duo KV6EXT-R2






















































Reviews:

No comments