SERVSWITCH
™
PS/2 MICRO EXTENDER FAMILY
18
2.6 How to Use This Guide
This guide describes the installation and configuration of the ServSwitch
™
Brand PS/2 Micro
Extender Series. Although the connection and operation of the system is relatively
straightforward, you should consider the following before getting started:
Connection & Compatibility
If you have purchased an
Extender Kit
, this will contain all the cables required to connect the
Local unit to your PC or KVM switch. The Remote console (keyboard, monitor and mouse)
and any audio and serial equipment connect directly to the Remote unit.
If you have purchased a
Remote Unit
, ensure that it is compatible with your Local unit (see
Compatibility
, page 16).
For information about connection and installation, see
Installation
, page 19.
Interconnection Cable
You will need CATx (any category 5, 5e, 6 or higher) cable, terminated with RJ45 plugs, to
connect the Local and Remote units (see
Interconnection Cable Requirements
, page 20).
Adjusting Video
Video signals become distorted when transmitted over CATx cables. To get the best from
your extender system, it is
essential
that you adjust the Remote unit to optimize the video
image quality:
•
For experienced users, there is a
Quick Setup
section at the start of this guide (see page
10).
•
For the full procedure, see
Remote Unit Configuration & Operation
, page 28.
Summary of Contents for ServSwitch ACU3201A
