Black Box ServSwitch ACU3201A, User Manual

Page: 12 / 58

SERVSWITCH
™
PS/2 MICRO EXTENDER FAMILY
10
1. Quick Setup
This section briefly describes how to install your KVM extender system and optimize the
video signals. Unless you are an experienced user, we recommend that you follow the full
procedures described in the rest of this manual. Refer to the command summary on the next
page when following this procedure.
.
Install system
1. Connect Remote unit to KVM and audio/serial devices
(if present).
2. Connect Local unit or Extender hub to CPU.
3. Connect Remote and Local units with compatible CATx
Interconnect cable.
4. Power up system.
Any Problems? See
Installation and
Troubleshooting
sections.
Enter Command Mode on Remote unit
<Left Control> + <Left Shift> + <F10>
Choose video channel: <1> or <2>
Adjustments apply to selected channel.
Video equalization
applies to both
channels.
See page 30
Interconnect
cable >75ft (25m)?
Yes
No
Set Video Equalization
<Left Control> + <E>
Setup Complete
TFT Users: Set monitor to auto-adjust, or if you are an
advanced user, manually adjust the monitor’s clock and
phase for optimum video quality.
Configure
single channel or
both?
Single
Both