724-746-5500 | blackbox.com
Page 14
ACS253A-CT
Chapter 2: Overview
2.6.2 ServSwitch KVM Extender DVI/VGA, PS/2 Dual Access, CATx (ACS253A-CT) Remote and Local
Unit Back Panels
ASC253A-CT Remote Unit Back Panel
1
2
3
4
5
6
7
8
9 10
Figure 2-1. ACS253A-CT remote unit back panel.
Table 2-1. ACS253A-CT remote unit components.
Number
Component
Description
1
6-pin mini DIN connector
Connects to PS/2 mouse
2
6-pin mini DIN connector
Connects to PS/2 keyboard
3
Communication Error LED*
Flashes to indicate number of communication errors during previous 60 minutes
4
RJ-45 connector
Interconnect—carries video and data signals to local unit over CATx cable
5
Link Status LED*
On when link connection is locked; flashing when not connected or not functioning
6
RJ-22 connector
Used for firmware upgrades
7
DVI-I connector
DVI and VGA output—connects to remote console monitor
8
Video Signal LED* (green)
On when attached and valid mode detected; off when not attached and detected
9
Device Ready LED* (red)
Lights on when device is ready; off when device is not ready
10
4-pin power connector
Links to 6-V power supply
*NOTE: For more details about the LED indicators, see Table 3-1 in Section 3.3.
