ServSwitch 4site - Installation and Operation Manual
ON SCREEN DISPLAY
RESET PS/2
Use arrow keys to navigate in the COMPUTER menu to the entry RESET PS/2 and press ENTER/SELECT
to open the RESET PS/2 window.
Use arrow keys
◄►
or “+” and “-” keys to select the channel (1 to 4) you wish to reset and con
fi
rm by pressing
ENTER/SELECT.
CHANGE EDID/DDC
Use CHANGE EDID/DDC to add two freely selectable video modes to the list of video modes saved in the
EDID visible to the connected computers at the four video input ports.
Use arrow keys to navigate in the COMPUTER menu to the entry CHANGE EDID/DDC and press ENTER/
SELECT to open the CHANGE EDID/DDC window.
Use arrow keys
◄►
to select the
fi
rst additional video mode.
Use arrow keys
▲▼
to navigate to and arrow keys
◄►
to select the second video mode.
Use arrow keys
▲▼
to navigate to “Signal“ and arrow keys
◄►
to switch between analog or digital. This
setting speci
fi
es whether the EDID should identify the ServSwitch 4site as an analog or digital device.
Usually it is safe to leave this setting at “digital”.
OSD - COMPUTER - RESET PS/2 / CHANGE EDID/DDC
53
