ServSwitch 4site - Installation and Operation Manual
INSTALLATION
Connecting the computers
- Switch off the computer and disconnect keyboard, monitor and mouse.
- Connect keyboard and mouse to the computer ports either with a single USB cable or via the PS/2
interface (use the Y cable)
- To connect an analog computer video source (VGA) to V-Switch quad, use a VGA-DVI cable.
Digital video sources are connected via a DVI cable.
The diagram shows the European cables. US cables see page 63.
Powering up the system
- Switch on ServSwitch 4site with the power switch on the rear panel. All front panel LEDs light up brie
fl
y
indicating that ServSwitch 4site is ready for operation. ServSwitch 4site is now in Quad mode (default).
-
Power up all connected computers. ServSwitch 4site recognizes all input video sources automatically and
displays them on your monitor screen.
-
To select another display mode, use the relevant keyboard commands (see pages 11-14) or buttons on the
front panel (pages 5, 6 and 15).
Con
fi
guration
Use either keyboard command
hotkey ‘O’
(default setting = CTRL + ALT plus ‘O’) or simultaneously press
Quad
and
PiP
buttons on the front panel of ServSwitch 4site for longer than one second to call up the OSD
main menu.
All parameter settings are described in chapter OSD.
INSTALLATION
10