ServSwitch 4site - Installation and Operation Manual
INSTALLATION
INSTALLATION
9
ServSwitch 4site is best located as close as possible to the computers. This reduces the length of cables and
permits a clearer and more cost-effective installation.
By default, the ServSwitch 4site is delivered as the desktop version. Using the rack mount kit supplied, it may
also be mounted in a 19” rack. See deliverables page 63.
Keyboard, monitor and mouse (console) are connected to the ServSwitch 4site by means of the corresponding
cables (DVI, USB or PS/2).
For distances greater than 5 m, KVM extenders allow you to work remotely via CAT5,
fi
ber optic or Ethernet
connection.
Connecting unit to power
-
Plug the power cable into the power plug located on the rear panel of ServSwitch 4site, but do not turn
power on yet.
Connecting console (monitor, keyboard and mouse)
- Connect your monitor to the monitor port of ServSwitch 4site via VGA-DVI cable (analog) or DVI cable
(digital).
-
Connect your USB mouse and keyboard to the USB-A ports on the console.
-
PS/2 mouse and keyboard can be connected to ServSwitch 4site using a PS/2-USB adaptor.
Contact technical support for details.
KVM
console
with
digital
or
analog
monitor,
USB
mouse
and
USB
keyboard