Rack Nest 2/14 Card Cage
5-1
Chapter 5
MT1100C, MT1102C Cards
This chapter describes the card version of the T1 converter, designed for
installation in the Rack Nest 2/14 card cage. The chapter contains the following
sections:
•
The Rack Nest 2/14 card cage
•
MT1100C, MT1102C cards
•
Power supply to the cards
•
Installing the cards.
5.1 Rack Nest 2/14 Card Cage
The Rack Nest 2/14 card cage contains one or two power supplies and up to
14 plug-in cards.
For each of the 14 cards, the rear panel contains a male connector for the terminal
block and a DB-25 connector. A protection cover protects the terminal block
connectors.
Line Connector
The line is to be attached to the rear panel terminal block connectors. It contains
screws for connecting the transmit and receive pairs and ground, if present.
The Rack Nest 2/14 is also available with BNC coaxial unbalanced or RJ-45
balanced line connectors.
DTE Connector
The 25-pin D-type female interface connector provides all interface signals for the
digital interfaces. Units with V.35 interface require an external mechanical
adapter.
