21
CHAPTER 3: Installation
3.4.2 I
NSTALLING A
S
INGLE
U
NIT IN A
19-
INCH
R
ACK
The rack-adapter kit for single-unit installation includes one short bracket
and one long bracket. The brackets are fastened with screws to the two side
walls of the case, as shown in Figure 3-2.
To prepare the Converter for rack installation, attach the two brackets to
the sides of the unit. Do this by inserting screws and flat washers into the
two holes at the front of each side (nuts are already in place inside the unit).
After attaching the brackets, install the unit in your 19-inch rack by fastening
the brackets to the rack’s side rails with four screws (not included in the kit),
two on each side.
Figure 3-2. Installing a single unit in a 19-inch rack.
