C H A P T E R 6 - C O N F I G U R A T I O N U T I L I T Y
24
1 - 8 7 7 - 8 7 7 - 2 2 6 9
w w w . b l a c k b o x . c o m
T R A N S M I T P A C K E T S E L E C T I O N
This section allows you to select the data packet used to perform the Range Test. You may either create
data of a specified byte length or load your own text or configuration file.
T E S T T Y P E
The test type allows you to select how long the test will be performed.
R E C E I V E P A C K E T D I S P L A Y
This section allows you to select how the received packets will be displayed. Received packets can either be
displayed in ASCII or Hexadecimal format, marked with a time stamp, and show only when an error has
occurred.
T A B L E 6 : T E S T S E L E C T I O N S E T T I N G S
T E S T S E L E C T I O N
P O R T 1 A C T I O N
P O R T 2 A C T I O N
H A R D W A R E S E T U P
Port 1 -> Port 2
TX
RX
2
Port 2 -> Port 1
RX
TX
2
Port 1 <-> Port 2
TX/RX
TX/RX
2
Port 1 Send Only
TX
N/A
3
Port 1 Receive Only
RX
N/A
3
Port 1 Loopback
TX/RX
N/A
1
T A B L E 7 : T E S T T Y P E
T E S T T Y P E
D E S C R I P T I O N
Continuous
Test will run until stopped.
Timed
Test will run for a specified time period
Number of Runs
Test will run for a specified number of runs
Single Step
Test will run for a single step.
Break on Error
Test will run until an error occurs
