111
6.0 V.25 bis Autodialer
Table 6-2. V.25 bis Dialing Parameters.
(Table also applies to Dumb mode and Bell 208 operation)
Characters that can be dialed:
0—9
Can only be tone dialed:
A, B, C, D, #, and *
L
Links a phone number to another
number to be dialed as an alternate
when the primary number is busy or
does not answer. See L - LINK in
Section 5.2
.
P
Sets pulse-dialing mode.
T
Sets tone-dialing mode.
W or : (colon)
Wait 30 seconds for dial tone before
proceeding.
[CR] or .
Required at end of dial command line.
(carriage return
[CR] is sent from DTE keyboard.
or period)
Dumb/208 mode only: Period has
same function, but may be entered via
front panel (PHONE LCD screen).
, (comma)
Pause before processing next
or <
character in dial string.
L, P, T, and W may be entered as upper- or lower-case letters. Spaces or
hyphens (-) may be used as separators for clarity; they have no effect.
