25
AUTO LINC UP
• DT specifies touch-tone dialing.
• Adding the comma adds a two-second delay
for the automatic calibration mode. If your
communication software does not allow adding
a comma in the dial command string, you can
add it in front of the first digit of the telephone
number you are trying to have the modem dial.
3. Perform one of the following steps:
• If your modem does not look for a dial tone, or
if you added X3, use the telephone keypad to
dial the remote modem’s telephone number.
Then press Enter on your computer keyboard.
• If your modem looks for a dial tone and your
communication software prevents you from
editing the Dial command line or initialization
string, press Enter on your computer keyboard.
Immediately after the modem finishes dialing, use
the telephone keypad to dial the Host number.
Either step should allow your modem to connect
with the remote host modem.
