14
AUTO LINC UP
4. Installation
4.1 Connection Procedures
To connect your Auto Linc Up to a telephone, refer to
Figure 2-1
on
page 9
and follow the steps listed below.
1. Remove the spiral handset cord from the handset
jack on the telephone base unit and insert it into
the Auto Linc Up connector jack labeled
HANDSET.
2. Insert the Linc Up’s modular telephone cord
(which is permanently attached at one end to the
Linc Up) into the handset jack on the telephone
base unit.
3. Connect a modular telephone cord from your
modem, fax/modem, or fax machine jack labeled
“Line” or “Wall” to the Linc Up connector jack
labeled DATA.
4. If you’re using the supplied AC adapter, connect
the round end to the jack labeled to the jack
labeled DC on the Auto Linc Up and the other
end to an AC outlet.
