Black Box LR9603A, Quick Install Manual

Page: 18 / 30

15
CHAPTER 2: Quick Setup Wizard
Table 2-5 lists the parameters you must select to activate the PPPoE protocol.
Table 2-5. PPPoE parameters.
Parameter Description
User Name Type in the user name provided by your ISP for the
PPPoE connection.
Password Type in the password provided by your ISP for the
PPPoE connection.
Please retype Type in the password again to reconfirm.
your password
Service Name This is optional. Type in the service name if your ISP
requires it; otherwise, leave it blank.
MTU This is optional. Type in the maximum size of your
transmission packet to the Internet. Leave it as is if
you do not want to set a maximum packet size.
Maximum Idle Time Type in an idle time threshold (minutes) for the WAN
port. This means that if no packets have been sent
(no one using the Internet) during this specified
period, the router will automatically disconnect the
connection with your ISP.
Auto-reconnect If you check the Auto-reconnect function, then when
the WAN connection is disconnected, the router will
automatically reconnect when a user requests access
to the Internet.
Back button Click on this button to go back to the previous screen.
OK button Click on this button to save your changes and go on
to the next screen.