12
PURE NETWORKING BROADBAND ROUTER QUICK INSTALLATION GUIDE
Table 2-3. Cable modem parameters.
Parameter
Description
Host Name
If your ISP requires a host name, type in the host
name provided by your ISP. Leave it blank if your ISP
does not require a host name.
MAC Address
Your ISP may require a particular MAC address in
order for you to connect to the Internet. This MAC
address is the PC’s MAC address that your ISP had
originally established your Internet connection to.
Type in the MAC address in this section.
Clone MAC Address
Or, use the
Clone MAC Address
button to replace
button
the WAN MAC address with the MAC address of the
PC you are currently using. To find out what the PC’s
MAC address is, see
Appendix A
in the users’
manual.
Release button
Click on this button to release the WAN IP address.
Renew button
Click on this button to renew the WAN IP address.
Back button
Click on this button to go back to the previous screen.
OK button
Click on this button to save your changes and go on
to the next screen.
Click
OK
when you have finished the configuration above. The configuration for
the cable modem connection is complete. You can start using the router now. If
you wish to use some of the advanced features supported by this router, see
Chapters 6
,
7
, and
8
in the users’ manual on the CD-ROM that’s included with
your router.
2.3.2 F
IXED
-IP
X
DSL
Select Fixed-IP xDSL if your ISP has given you a specific IP address to use. Your ISP
should provide all the information required in this section. See Figure 2-4.
Summary of Contents for LR9603A
Page 3: ......
