Operational Mode Configuration
As referenced in Product Applications, there are six modes of operation that can be
configured through the Serial/Telnet session. All of the modes of operation will
block management traffic on the data port.
The configuration screen is accessed by typing
config
and pressing
Enter
from the
Additional Commands screen.
Mode One - Default
This default mode is designed to pass untagged traffic only. Press
F4
to return to the
Additional Device-Specific Commands screen.
Transparent Mode - the unit passes all traffic between Data and Optics except
management traffic. If management traffic is Untagged, Untagged packets will
not be passed. If Tagged, traffic with a management VLAN ID will not be passed
Default Mode - the unit passes only Untagged Packets.
The unit is currently in Default Mode.
Enter Y for Transparent Mode, N for no Transparent Mode or <enter> to
move to other options [ N ]
Mode Two - Transparency with Untagged Management
This mode is designed to pass all tagged and extra-tagged customer traffic
unchanged and must be managed using untagged traffic only. It does not add or
remove tags.
Select
Y
on the initial config screen. From the Transparent Mode Setup screen,
select
N
in the fields shown below.
TRANSPARENT MODE SETUP
Is a VLAN tag required on Management packets? [ N ]
Do you want to enter the Extra Tag mode? Enter Y for Extra Tagging.
Enter N if you do not want Extra Tags [ N ]
19
Summary of Contents for LMM101A
Page 37: ...Notes 31...
