Assign the IE Managed Miniature Media Converter an IP address before using a
Telnet session (
the default IP address is 10.10.10.10
). All configurations performed
using the serial port can also be performed using Telnet. Multiple accounts can be
assigned with individual names and passwords.
Each account can be assigned one of the following authority roles:
•
User
This role can only see status, change a password, and reboot.
•
Operator
This role can perform User role functions and change settings.
•
Administrator
This role can perform Operator role functions, add/delete accounts, and use the
“cleandb” command.
NOTE: Account access through the Serial port is at the Administrator level. Only the administrator
level account is available on the serial port. User rights only allow viewing of status/settings
but not changing of settings.
Main Configuration Screen
Press Enter, at the prompt, to display the main configuration screen.
The following displays are available:
•
Saved Values (displays changes made during current session)
o
IP Address (must be assigned during initial configuration)
o
Subnet Mask (must be assigned during initial configuration)
o
Default Gateway (default router for IP traffic outside subnet)
o
Server IP Addr (for the TFTP server)
o
New Prom File (firmware file name)
•
Current Values (displays values currently in use)
o
IP Address (IP address of SNMP agent)
o
Subnet Mask (mask to define IP subnet)
o
Default Gateway (default router for IP traffic outside subnet)
o
Server IP Addr (for the TFTP server)
o
New Prom File (firmware file name)
NOTE: Reboot the IE Managed Miniature Media Converter for changes to take effect. To reboot, type
reboot
at the prompt on the main configuration screen, or power cycle the chassis. If a Delete
key is not available, use the F2 key. Any changes to the configuration may result in a
momentary loss of connection.
13
Summary of Contents for LMM101A
Page 37: ...Notes 31...
