21
LINESHARE MASTER-4, LINESHARE RACK
5. Using the Lineshare Master-4’s
Custom Functions
To change the Lineshare Master-
4’s functions, we recommend using
the following steps:
1. Using
Table 5-1
, write down the
sequence of changes.
2. Enter the programming mode.
3. Change the functions.
The following sections explain
how to enter the programming
mode and change the functions.
5.1 Using the Programming Mode
To enter the programming mode,
perform the following steps:
1. Make sure that the telephone
line from the phone company is
connected to the patch panel,
and then to the Lineshare
Master-4.
2. Plug a tone phone into the
appropriate RJ-11 jack on the
modem patch panel in place of
the modem.
3. Pick up the phone receiver and
make sure you hear dial tone.
4. Within five seconds, press and
release the * key and then the #
key on the telephone keypad.
The Lineshare Master-4 includes
many options that enable you to
customize its operation to meet
specific application needs. The
programmable functions offered by
the Lineshare Master-4 allow you to
change the length of its tones, time
between tones, time before the first
tone, number of tones to transmit,
and the call-hold feature.
The Lineshare Master-4’s
functions are factory-preset, and it is
unlikely that you will need to make
many changes. However, if you
desire, you can alter any program by
using a tone phone connected to the
appropriate RJ-11 jack on the patch
panel. The Lineshare Master-4
cannot be programmed with a
rotary/pulse dialing phone.
NOTE
Before attempting to
program any function, we
recommend that you first
thoroughly read the
programming procedures.
Then read “Changing
functions” in Section 5.1 and
decide if you want to make
changes.
