76
10/100 Managed Hub
Trap Receiver Setup
Traps are messages sent across the network to an SNMP Network
Manager. These messages alert the network manager for network manage-
ment purposes. You can set up six trap receivers.
You can configure the following:
Community Name: The authorized SNMP community string
of the remote network manager (maximum 16 characters).
IP Address: The IP Address of the remote network manager
station to which traps should be sent.
Status: A community name can be active or inactive.
Community names that are set to active receive traps.
Trap Receiver Setup
Summary of Contents for LH8112A
Page 22: ...22 10 100 Managed Hub...
Page 36: ...36 10 100 Managed Hub...
