Installation 19
•
Console Management
Refer to Chapter 4: Console Management
•
Web-Based Management
Refer to the Network Management Guide
•
SNMP Management
Refer to the Network Management Guide
Client Hub Role
Client hubs supply the stack with additional ports (12/24) and an addi-
tional expansion module slot. Client hubs can be positioned above or
below the master hub. The LH8112A-S and LH8124A-S can also act as
stand alone unmanaged hubs.
Hub ID
The master hub and client hubs can be positioned anywhere in the stack
and each hub’s ID is automatically assigned based on its position (in the
stack).
Segmenting Hubs
The 10/100 Managed Hubs can isolate one or both segments (10 Mbps
and 100 Mbps segments) from the other hubs in a stack. When a segment
is isolated it does not repeat to the other segments in the hub or to other
segments in the stack.
Connecting Devices
The dual speed 10/100 Managed Hub can connect to 10Mbps, 100Mbps,
or 10/100Mbps devices due to its auto sensing capability. The 10/100
Managed Hub will auto sense the connected port speed and set its port to
match the speed of the connected port.
Cables
The 10/100 Managed Hub ports accept Cat 3, 4 and 5 cables with RJ-45
connectors for 10Mbps connections and Cat 5 cables with RJ-45 connec-
tors for 100Mbps connections. The maximum length of cables, between
hub and workstations is 100 meters. The maximum length of cables,
between hub and hub is 5 meters for 100Mbps connections and 100
Summary of Contents for LH8112A
Page 22: ...22 10 100 Managed Hub...
Page 36: ...36 10 100 Managed Hub...
