Publication date: , 2015
Revision A1
104
retransmissions.
no dot1x timeout tx-period
15
GLOBAL_CONFIG
dot1x authentication timer inactivity <10-1000000> Time in seconds between check for
activity on successfully authenticated
MAC addresses.
15
GLOBAL_CONFIG
no dot1x authentication timer inactivity
15
GLOBAL_CONFIG
dot1x timeout quiet-period <10-1000000>
Time in seconds before a MAC-address
that failed authentication gets a new
authentication chance.
15
GLOBAL_CONFIG
no dot1x timeout quiet-period
15
GLOBAL_CONFIG
dot1x re-authenticate
Refresh (restart) 802.1X authentication
process.
15
INTERFACE_PORT_LIST
dot1x initialize [ interface <port_type_list> ]
Force re-authentication immediately
15
EXEC
dot1x system-auth-control
Set the global NAS state
15
GLOBAL_CONFIG
dot1x port-control { force-authorized |
force-unauthorized | auto | single | multi |
mac-based }
Sets the port security state.
15
INTERFACE_PORT_LIST
no dot1x port-control
Sets the port security state.
15
INTERFACE_PORT_LIST
dot1x guest-vlan
Enables/disables guest VLAN
15
INTERFACE_PORT_LIST
dot1x max-reauth-req <1-255>
The number of times a Request Identity
EAPOL frame is sent without response
before considering entering the Guest
VLAN
15
GLOBAL_CONFIG
no dot1x max-reauth-req
The number of times a Request Identity
EAPOL frame is sent without response
before considering entering the Guest
VLAN
15
GLOBAL_CONFIG
dot1x guest-vlan <1-4095>
Guest VLAN ID used when entering the
Guest VLAN.
15
GLOBAL_CONFIG
no dot1x guest-vlan
Guest VLAN ID used when entering the
Guest VLAN.
15
GLOBAL_CONFIG
dot1x guest-vlan supplicant
The switch remembers if an EAPOL
frame has been received on the port for
the life-time of the port. Once the switch
considers whether to enter the Guest
VLAN, it will first check if this option is
enabled or disabled. If disabled
(unchecked; default), the switch will only
15
GLOBAL_CONFIG
