Publication date: , 2015
Revision A1
106
10M}
debug phy reset
debug INTERFACE_PORT_LIST
debug phy gpio <0-13> mode
{output|input|alternative}
debug INTERFACE_PORT_LIST
debug phy gpio <0-13> get
debug INTERFACE_PORT_LIST
show interface <port_type_list> statistics
[ { packets | bytes | errors | discards | filtered |
{ priority [<0~7>] } } ] [ { up | down } ]
Shows the statistics for the interface.
0
EXEC
show interface <port_type_list> veriphy
Run and display cable diagnostics.
0
EXEC
clear statistics [interface] <port_type_list>
Clears the statistics for the interface.
0
EXEC
show interface <port_type_list> capabilities
0
EXEC
show interface <port_type_list> status
Display status for the interface.
0
EXEC
mtu
<'VTSS_MAX_FRAME_LENGTH_STANDARD'-'V
TSS_MAX_FRAME_LENGTH_MAX'>
Use mtu to specify maximum frame size
(1518-9600 bytes).
15
INTERFACE_PORT_LIST
no mtu
Use no mtu to set maximum frame size
to default.
15
INTERFACE_PORT_LIST
shutdown
Use shutdown to shutdown the
interface.
15
INTERFACE_PORT_LIST
speed {2500 | 1000 | 100 | 10 | auto {[10] [100]
[1000]} }
Configures interface speed. If you use
10, 100, or 1000 keywords with the auto
keyword the port will only advertise the
specified speeds.
15
INTERFACE_PORT_LIST
no speed
Use "no speed" to configure interface to
default speed.
15
INTERFACE_PORT_LIST
duplex { half | full | auto [ half | full ] }
Use duplex to configure interface duplex
mode.
15
INTERFACE_PORT_LIST
no duplex
Use "no duplex" to set duplex to default.
15
INTERFACE_PORT_LIST
media-type { rj45 | sfp | dual }
Use media-type to configure the
interface media type.
15
INTERFACE_PORT_LIST
no media-type
Use to configure the interface
media-type type to default.
15
INTERFACE_PORT_LIST
flowcontrol { on | off }
Use flowcontrol to configure flow control
for the interface.
15
INTERFACE_PORT_LIST
no flowcontrol
Use no flowcontrol to set flow control to
default.
15
INTERFACE_PORT_LIST
excessive-restart
Use excessive-restart to configure
backoff algorithm in half duplex mode.
15
INTERFACE_PORT_LIST
