Black Box LGB5124A User Manual Download Page 133

Page: 133 / 257

123

1. GVRP Mode

This configuration is to enable/disable GVRP Mode on particular port locally.



Disable:

Select to Disable GVRP mode on this port.



Enable:

Select to Enable GVRP mode on this port.

The default value of configuration is disable.

2. GVRP rrole

This configuration is used to configure restricted role on an interface.



Disable:

Select to Disable GVRP rrole on this port.



Enable:

Select to Enable GVRP rrole on this port.

The default configuration is disable.



Auto-refresh :

Click the box next to auto-refresh and the device will refresh the information automatically.



Upper right icon (Refresh):

Click on these icons to refresh theGVRP Global configuration information by manual.



Buttons:

Save

– Click to save changes.

Reset-

Click to undo any changes made locally and revert to previously saved

values.

Summary of Contents for LGB5124A


































































































































































































































































Search results

Summary of Contents for LGB5124A

Reviews:

Related manuals for LGB5124A

Brands by name

Popular brands

Black Box LGB5124A, User Manual

Search results

Summary of Contents for LGB5124A

Reviews:

Related manuals for LGB5124A

Brands by name

Popular brands