Figure 4-18. Bandwidth Management Configuration screen.
Table 4-14 describes the options shown in Figure 4-18.
Table 4-14. Bandwidth Management Configuration screen options.
Parameter Description
Port Number
From the drop-down menu, choose the port that you would like this
function to work on. Valid options are 1–8. To set up all ports at
one time, select All from the drop-down menu.
All Traffic for Ingress Rate
Limiting
Set up the limit of Ingress bandwidth for the port you choose.
Incoming traffic will be discarded if the rate exceeds the value you
set in the Data Rate field. If flow control is enabled, pause frames
are also generated.
All Traffic, State
Select Disable or Enable from the drop-down menu.
All Traffic, Data Rate(Mbps)
Type in a number from 0 to 1000 to represent the data rate in
Mbps.
8-Port 1000BASE-TX Web-Smart Ethernet Switch with 2 SFP Dual Media Ports
40
