Parameter Description
Speed
Displays the speed and duplex of all ports. Three speeds are
supported for twisted-pair media: 10 Mbps, 100 Mbps, and 1000
Mbps. If the media is 1 Gbps fiber, only 1000 Mbps speed is
supported. The status of speed/duplex mode is determined by the
negotiation of both local port and link partner in auto speed mode
or user setting in force mode. The local port has to be preset.
Flow Control
Shows each port’s flow control status. There are two types of flow
control in Ethernet: backpressure for half-duplex operation and
pause flow control (IEEE 802.3x) for full duplex. The switch
supports both. The default value is Enabled.
Aggregation
To get to the Aggregation screen shown in Figure 4-25, click on
Status
in the Maintenance menu on the Home
screen. Then click on
Aggregation
from the Status menu.
Figure 4-25. Aggregation screen.
Table 4-21 describes the parameters shown in Figure 4-25.
Table 4-21. Aggregation screen parameters.
Parameter Description
Normal
Displays the ports that do not join any aggregation trunking group.
Group 1–8
Displays the group members.
VLAN
CHAPTER 4: Web-Based Management
51
