Black Box Hardened Managed Ethernet Switch
System
System Information, System Name/
Configuration, Firmware Upgrade, Reboot, L
System Name/Password
System Name:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt w
switch_a(config)#
Password, IP Address, Save
ogout.
ill show on the screen.
2. Usage:
Use
hostname
command to set o
r name.
Use the
no hostname
command to disab
3. Command
Syntax:
(no) hostname HOSTNAME
HOSTNAME specifies the network name of the system.
4. Example:
The following example sets the hostname to
switch
, and shows the change
in the prompt:
switch_a(config)#hostname switch
switch(config)#
r change the network serve
le this function.
Password:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Use
enable password
command to modify or create a password to be used
when entering the Enable mode.
3. Command
Syntax:
enable password PASSWORD
PASSWORD specifies the new password of the system.
4. Example:
The following example sets the new password
mypasswd
to switch:
switch_a(config)#enable password mypasswd
switch_a(config)#
92 User’s Manual
