Black Box Hardened Managed Ethernet Switch
maximum speed (pps) of the interface.
4. Example:
The following example shows setting
storm
interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#storm-control level 30
switch_a(config-if)#
-control level
LEVEL (
30
) to the
Broadcast:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Term
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the
switch_a(config)#interface fe1
switch_a(config-if)#
inal Mode).
screen.
2. Usage:
Use
storm-control broadcast enable
command to enable broadcast traffic.
Use
no storm-control broadcast
command to disable broadcast traffic.
3. Command
Syntax:
storm-control broadcast enable
no storm-control broadcast
4. Example:
The following example shows setting
storm-control broadcast enable
to
the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#storm-control broadcast enable
switch_a(config-if)#
Multicast:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use
storm-control multicast enable
command to enable multicast traffic.
Use
no storm-control multicast
command to disable multicast traffic.
User’s Manual 105
