Black Box Hardened Managed Ethernet Switch
4. Example:
The following example enables dynamic VLAN creation for bridge GROUP
(
1
):
switch_a(config)#set gvrp dynamic-vlan
ridge 1
switch_a(config)#
-creation enable b
Per port setting:
GVRP:
1.
Command Mode: Configure mo
Logon to Configure Mode (Configure Term
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
de
inal Mode).
2. Usage:
Use
set port gvrp enable
command to e
rp disable
command to disable GVRP on a port or all
3. Command
Syntax:
set port gvrp enable all/IFNAME
set port gvrp disable all/IFNAME
all All ports added to recently configured bridge.
IFNAME The name of the interface.
4. Example:
The following example enables GVRP on the interface fe1 (port 1):
switch_a(config)#set port gvrp enable fe1
switch_a(config)#
:
set port gvrp enable all/IFNAME
set port gvrp disable all/IFNAME
all All ports added to recently configured bridge.
IFNAME The name of the interface.
4. Example:
The following example enables GVRP on the interface fe1 (port 1):
switch_a(config)#set port gvrp enable fe1
switch_a(config)#
nable and
set port gv
ports in a bridge.
Per port setting:
GVRP applicant:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to set the GVRP applicant state to normal or active.
3. Command
Syntax:
set gvrp applicant state active/normal IFNAME
active Active state
normal Normal state
IFNAME Name of the interface.
4. Example:
142 User’s Manual
