MNS-BB
Software User Guide
-42-
•
RFC 1908, Coexistence between Version 1 and Version 2 of the Internet-standard Network
Management Framework. SNMPv2 Working Group.
•
RFC 2104, Keyed Hashing for Message Authentication
•
RFC 2271, An Architecture for Describing SNMP Management Frameworks.
•
RFC 2272, Message Processing and Dispatching for the Simple Network Management Protocol
(SNMP).
•
RFC 2273, SNMPv3 Applications.
•
RFC 2274, User-Based Security Model (USM) for version 3 of the Simple Network Management
Protocol (SNMPv3).
•
RFC 2275, View-Based Access Control Model (VACM) for the Simple Network Management
Protocol (SNMP).
8.9.4 CLI
Syntax
:
set snmp type
=<v1|all>
This command lets the user choose which SNMP version the LE2425A and LEV2525A SNMP agent
support. If the value is “v1”, the agent will only support SNMPv1 access. If “all”, the agent supports
v1, v2c and v3 SNMP accesses.
Note
: By default SNMPv1 is enabled.
LE2425A#
set snmp type=v1
LE2425A#
show snmp
SNMP CONFIGURATION INFORMATION
------------------------------
SNMP Get Community Name : public
SNMP Set Community Name : private
SNMP Trap Community Name : public
AuthenTrapsEnableFlag : disabled
SNMP Access Status : enabled
SNMP MANAGERS INFO
------------------
SNMP TRAP STATIONS INFO
-----------------------
LE2425A#
set snmp type=all
LE2425A#
show snmp
SNMPv3 Configuration Information
==================================
System Name : LE2425A
System Location : Lawrence, PA
System Contact : [email protected]
Authentication Trap : Disabled
Default Trap Comm : public
V3 Engine ID : LE2425
Syntax
:
show snmp
This command shows simple SNMP agent configuration such as system name, location, contact, etc.
Depending on agent support type, it either shows v1 configuration or v3 configuration.
LE2425A#
show snmp
SNMPv3 Configuration Information
==================================
System Name : LE2425A
System Location : Lawrence, PA
System Contact : [email protected]
Authentication Trap : Disabled
