Black Box LB3104A series, Configuration Manual

Page: 89 / 99

ETHERNET EXTENDERS—CONFIGURATION GUIDE
86
To… You Press…
Routing
Change link protocol to SLIP 1.2.1.1.1
Change link protocol to CSLIP 1.2.1.1.2
Change link protocol to PPP 1.2.1.1.3
Change link cost/metric 1.2.1.3
Set header and control field compression 1.2.1.4.1
Set protocol field compression 1.2.1.4.2
Set IP compression 1.2.1.4.3
Enable/disable Multilink 1.2.1.4.4
Add static station and net 1.2.2.a
Clear all static stations and nets 1.2.2.c
Delete static station and net 1.2.2.d
Enter shared IP net 1.2.3.1
Enable/disable remote workstation IP address 1.2.3.2
Add remote workstation to IP address pool 1.2.3.3.a
Delete remote workstation from IP address pool 1.2.3.3.d
Clear all IP addresses from IP address pool 1.2.3.3.c
Enter primary domain name server 1.2.3.4
Enter secondary domain name server 1.2.3.5
Enter aging time for stations on the network 1.2.5
Interface Parameters
Enable/disable link status 1.3.1.1
Set link type to asynchronous 1.3.1.2.1
Set link type to synchronous 1.3.1.2.2
Set link type to ISDN 1.3.1.2.3
Set link type to leased ISDN 1.3.1.2.4
Set link type to frame relay 1.3.1.2.5
Set link connection type 1.3.1.3
Set link connection timeout 1.3.1.4
Set control signals mode 1.3.1.5
Set baud rate 1.3.1.6
Set parity to on or off 1.3.1.7
Set number of stop bits 1.3.1.8
Set modem settings 1.3.1.9
Set ISDN protocol 1.3.2.1
Set Frame Relay DLCI parameters 1.3.3
Access Control (Security)
Enable/disable external access security 1.4.1.1
Set minimum accepted PPP security 1.4.1.2
Set access mode to unlimited access 1.4.1.3.1.1
Set access mode to limited access 1.4.1.3.1.2
Set access mode to static stations/nets only 1.4.1.3.1.3
Edit access list 1.4.1.3.2
View user access profiles 1.4.1.4
Enter external device name for security identification 1.4.2.1
Enter external device password for security identification 1.4.2.2