CHAPTER 5: Advanced Setup Menu
59
F
RAME
R
ELAY
DLCI P
ARAMETERS
The parameters in the Frame Relay DLCI Parameters menu are described below.
DLCI
Select this parameter to specify the DLCI number.
State
Select this parameter to specify whether the DLCI is Enabled or Disabled (for receive/transmit).
CIR
Select this parameter to specify the maximum amount of data in bits which the network guarantees to transfer
during the measurement interval (the measurement interval is usually one second). The value of this
parameter is obtained from the Frame Relay provider.
Excess
Select this parameter to specify the maximum amount of uncommitted data bits that the network will attempt
to deliver during the measurement interval. The value of this parameter should be received from the Frame
Relay provider.
Throughput
Select this parameter to specify the average number of data bits per second transferred by the network. When a
measurement interval of one second is assigned to the CIR, the throughput value should equal the CIR value.
Access Control (Security)
Figure 5-33. Access Control Menu Outline.
Device Control
2
Setup
1
Advanced Menu
Access Control
(security)
4
External Access
Security
1
Device Security
Identity
2
Security
Host/Guest
3
Advanced PC to LAN
Bridge Link Security
4
Script Setup
5
1. Security
Authorization
1. Name
1. Security Link
2. Minimum Accepted
PPP Security
2. Password
3. Accessible
Stations/Nets
4. User Access Profiles
1. Access Mode
2. Limited Access List
1. Unlimited Access
2. Limited Access
3. Static Stations/
Net Access
Summary of Contents for LB3104A series
Page 3: ......
