CHAPTER 3: Quick Setup Menu
23
LAN IP Mask
Select this parameter to enter the IP mask. The mask is configured automatically from the IP address class. If
you want to change the default mask, enter a new mask. For example, the IP mask is usually 225.225.225.0. A
mask of this sort would allow 254 hosts on the LAN. If you want to create a subnet which allows 6 users,
including the Ethernet Extender, configure the mask as 22.225.225.248. on the Ethernet Extender and each
host that is included on the subnet. Refer to Figure 3-3.
Figure 3-3. Setting up the IP Mask.
3.1.9 S
ECURITY
S
ETUP
Device Access Name
Select this parameter to display the name assigned to the Ethernet Extender for identification by the Internet
service provider. To change the device access name, type in the new name and press ENTER.
Device Access Password
Select this parameter to assign or update a password. The password is used to access the Internet.
The Ethernet Extender’s default setup does not include a password. Use the space bar to toggle between
no
(do
not change the password) and
yes
(enter a new password). If you choose
yes
, the following appears:
Enter new password : ***
Enter new password verification : ***
Type the new password and verify it.
Ethernet Extender
LAN IP address
192.168.1.1
Mask
255.255.255.248
IP address
192.168.1.2
.3
.4
.5
.6
Mask
255.255.255.248
.248
.248
.248
.248
Default Gateway
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
192.168.1.1
Summary of Contents for LB3104A series
Page 3: ......
