25
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHOOSING RX VIDEO MODE
KVX-HP 400-series receivers contain an internal DisplayPort™ MST hub which you can choose to either use or bypass. When
bypassed (default setting), the full combined MST (Multi-Stream Transport) signal received from the transmitter is sent directly
to video port 1. If the internal hub is engaged, then the first and second SST video streams (Single-Stream Transport) are
decoded and sent to ports 1 and 2 respectively. The two modes are as follows:
• SST mode
- This mode engages the internal hub and delivers the first and second (SST) video streams to the video ports on
the receiver.
• MST mode
- (Default) This mode bypasses the internal hub and delivers all four possible (MST) video streams directly to video
port 1 on the receiver. Port 2 is disabled. Connect to either MST-compliant displays or an MST hub.
TO CHOOSE THE RECEIVER VIDEO MODE
1 Using your console keyboard attached to the receiver module, press (and release) the
Ctrl
key
three times
in quick succession (either
of the keyboard’s Ctrl keys can be used).
In response, the three keyboard indicators will all flash, once per second.
2 Press the numeric key located above the main section of the keyboard (not the numeric keypad) which represents the required
mode:
• 8
for SST mode,
• 9
for MST mode.
The current mode will be displayed on the Dashboard next to
the link speed, eg SST or MST:
Notes:
• If the mode is changed, this will cause the RX to reboot.
• If you do not press any key within five seconds, or press any key other than the digits 1, 8 or 9 (or once you have successfully
chosen an action), the keyboard will revert to normal operation. To use another hotkey function, repeat the whole procedure
described above.
X:0.00.0112
10G
SST
X:0.00.0112
10G
MST
