23
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
RECEIVER POWER CONNECTION
There is no on/off switch on either of the modules, so operation begins as soon as
power is applied. The power adapters supplied with the modules use locking-type plugs
to help prevent accidental disconnections; please follow the instructions shown on the
right whenever disconnecting a power adapter.
TO CONNECT THE POWER ADAPTER
1 Attach the output plug of the supplied power adapter to the power input socket on the
right side of the rear panel.
2 Connect the IEC connector of the supplied country-
specific power cord to the socket of the power
adapter.
3 Connect the power cord to a nearby mains supply
socket.
TO DISCONNECT THE POWER ADAPTER
1 Isolate the power adapter from the mains supply.
2 Grasp the outer body of the power adapter plug where it connects with
the module.
3 Gently pull the body of the outer plug away from the module. As the body
of the plug slides back, it will release from the socket and you can fully
withdraw the whole plug.
IMPORTANT: Please read and adhere to the electrical safety
information given within the supplied safety leaflet. In particular,
do not use an unearthed power socket or extension cable.
Note: Both the modules and the power supplies generate heat
when in operation and will become warm to the touch. Do not
enclose them or place them in locations where air cannot circulate
to cool the equipment. Do not operate the equipment in ambient
temperatures exceeding 40 degrees Centigrade. Do not place the
products in contact with equipment whose surface temperature
exceeds 40 degrees Centigrade.
From the
power adapter
Gently pull back the plug outer
body to release the lock
12
VD
C
12
VD
C
