23
Or, do the following:
1. To invoke the hotkey mode, press the <Left-Ctrl> key twice within two
seconds. The switch will beep to indicate that it’s in hotkey mode.
2. Press the <up-arrow> or <down-arrow> keys to switch to the previous or next
port, respectively.
Table 4-1 lists the hotkey commands.
Table 4-1. Hotkey commands.
Command
Description
<Left-Ctrl><Left-Ctrl>
X
Switch to PC “X” master port.
<Left-Ctrl><Left-Ctrl>
X C
Switch PC “X” slave port.
<Left-Ctrl><Left-Ctrl>
F1
Begin AutoScan. The AutoScan feature
allows you to monitor the activity of the
connected computers so that you can
monitor the computer activity without
having to press the front-panel buttons.
<Left-Ctrl><Left-Ctrl>
Stop AutoScan.
<Left-Ctrl><Left-Ctrl>
F2
Begin Manual Scan.
<Left-Ctrl><Left-Ctrl> <up arrow>
Switch to previous active PC.
<Left-Ctrl><Left-Ctrl> <down arrow>
Switch to next active PC.
X
= 1–8 or A–H
C
= Slave port number
F1–F4
= Function keys
CHAPTER 4: Operation
Summary of Contents for KV9204A
Page 2: ......
