8
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 3: PRE-INSTALLATION
NOTE: The “L” Shaped Adapter Bracket will not install on the top or bottom of the one-port enclosure.
FIGURE 3-5. APPLICATION #2, L-SHAPED BRACKET
3.2 STEP 2: BULK FIBER CABLE ENTRY
There are several points of entry where the incoming bulk fiber cable can enter the enclosure. From the factory, the point of entry is
located at the bottom of the enclosure and the other access points are plugged. The bulk fiber cable is secured by a small angled
bracket with a hand-tighten grommet and Kevlar
®
clamp. If an alternate bulk fiber point of entry is desired, you can relocate the
angled bracket to another available position.
Bulk fiber entry
Bulk fiber entry
Grommet nut
Kevlar
®
clamp
FIGURE 3-6. BULK FIBER CABLE ENTRY LOCATIONS
